What are the signs of sealing failure in TBM disc cutters?

Nov 05, 2025

Leave a message

Olivia Miller
Olivia Miller
Olivia is a tunnel engineering equipment reviewer. She has a deep understanding of the market of shield tunneling tools and tail brushes. Through objective and accurate reviews, she provides valuable references for customers to choose products.

As a seasoned TBM disc cutter supplier, I've witnessed firsthand the critical role these components play in the success of tunneling projects. TBM disc cutters are subjected to extreme conditions, and one of the most common issues we encounter is sealing failure. In this blog post, I'll share the signs of sealing failure in TBM disc cutters, which can help you detect problems early and prevent costly downtime.

What is the Seal in TBM Disc Cutters?

Before diving into the signs of sealing failure, let's understand the importance of the seal in TBM disc cutters. The seal is a crucial component that prevents contaminants such as water, dirt, and rock particles from entering the bearing cavity of the disc cutter. A well - functioning seal ensures proper lubrication of the bearings, reduces friction, and extends the service life of the cutter.

1. Increased Torque Requirements

One of the earliest signs of sealing failure is an increase in the torque required to rotate the disc cutter. When the seal fails, contaminants can enter the bearing cavity. These contaminants act as abrasives, increasing the friction between the bearing components. As a result, the TBM has to apply more torque to keep the disc cutter rotating. If you notice a gradual or sudden increase in the torque readings during the tunneling process, it could be an indication of seal failure.

For example, in a recent project where we supplied 19" Single Disc Cutter, the operator reported a significant increase in torque after a few days of operation. Upon inspection, we found that the seal had failed, allowing rock dust to enter the bearing, which was causing the increased friction.

2. Unusual Noise

Unusual noise coming from the disc cutter is another tell - tale sign of sealing failure. The normal operation of a well - sealed disc cutter is relatively quiet. However, when the seal fails and contaminants enter the bearing, they can cause uneven wear and damage to the bearing surfaces. This can result in knocking, grinding, or rattling noises.

If you hear any abnormal sounds during the operation of the TBM, it's essential to stop the machine and inspect the disc cutters immediately. Ignoring these noises can lead to further damage to the cutter and other components of the TBM. In some cases, we've seen that a simple seal replacement can prevent more extensive and costly repairs.

3. Leakage of Lubricant

The leakage of lubricant from the disc cutter is a clear sign of sealing failure. The seal is designed to keep the lubricant inside the bearing cavity, where it can perform its function of reducing friction and preventing wear. When the seal is damaged, the lubricant can escape, and you may notice oil stains around the disc cutter or on the tunnel floor.

Leakage not only indicates a problem with the seal but also poses a risk to the bearing's performance. Without proper lubrication, the bearing will overheat and wear out quickly. For instance, in a project using TBM Monoblock Cutter TCI, we found that lubricant leakage was due to a damaged seal. Once the seal was replaced, the lubricant was retained, and the cutter's performance improved significantly.

4. Excessive Wear on the Cutter Ring

Excessive wear on the cutter ring can also be related to sealing failure. When the seal fails, contaminants can enter the bearing and cause misalignment or uneven rotation of the cutter. This misalignment can lead to uneven loading on the cutter ring, causing it to wear out faster than normal.

If you observe that the cutter ring is wearing unevenly or at a much faster rate than expected, it's worth checking the seal integrity. In some cases, replacing the seal and realigning the cutter can extend the life of the cutter ring and save you money on replacement costs.

5. Temperature Increase

An increase in the temperature of the disc cutter is a sign that something is wrong. The normal operating temperature of a well - sealed disc cutter is within a certain range. When the seal fails, the increased friction due to contaminants in the bearing generates more heat. You can use infrared thermometers or temperature sensors to monitor the temperature of the disc cutters during operation.

If the temperature exceeds the normal range, it's a strong indication of seal failure. In a project involving Hard Rock TBM Disc Cutter, we noticed a significant temperature increase in one of the disc cutters. After inspection, we found that the seal had failed, and the bearing was overheating due to the presence of rock particles.

6. Visual Inspection of the Seal

Sometimes, the most straightforward way to detect seal failure is through a visual inspection. Regularly inspect the seal for signs of damage, such as cracks, tears, or deformation. A damaged seal is more likely to allow contaminants to enter the bearing cavity.

You can also check for signs of contamination around the seal area. If you see dirt, water, or other foreign substances on or near the seal, it's a clear indication that the seal is not functioning properly.

Why Early Detection of Seal Failure is Crucial

Early detection of seal failure in TBM disc cutters is crucial for several reasons. Firstly, it can prevent more extensive damage to the cutter and other components of the TBM. A small seal failure, if left untreated, can lead to bearing failure, cutter ring damage, and even damage to the TBM's drive system.

Secondly, it can save you time and money. By detecting and replacing the failed seal early, you can avoid costly downtime and reduce the need for major repairs or component replacements. In the long run, this can significantly improve the efficiency and profitability of your tunneling project.

Contact Us for TBM Disc Cutter Solutions

If you're experiencing any of the signs of sealing failure in your TBM disc cutters or if you're looking for high - quality TBM disc cutters, we're here to help. As a leading TBM disc cutter supplier, we have a wide range of products, including 19" Single Disc Cutter, TBM Monoblock Cutter TCI, and Hard Rock TBM Disc Cutter. Our team of experts can provide you with professional advice on cutter selection, maintenance, and troubleshooting. Contact us today to discuss your specific requirements and start a successful partnership.

TBM Monoblock Cutter TCI19" Single Disc Cutter

References

  • "Tunneling Technology Handbook" by Peila, D.
  • "Mechanics of Tunneling" by Mair, R. J.
  • Industry reports on TBM disc cutter performance and maintenance.
Send Inquiry