According to the provided information, there is no detailed description of the specific steps for installing the front shield anti slurry brush. However, you can refer to the following information for operation:
Preparation work: Ensure that all necessary tools and materials are ready, including new grout brushes, necessary fixing devices (such as bolts), thixotropic mud interfaces, etc.
Check the equipment: Before installation, carefully inspect the condition of the front shield and grout brush to ensure that there is no damage or other issues.
Remove the old grout brush (if any): If there is already an old grout brush on the front shield, it needs to be removed first. Use a suitable tool (such as a wrench) to loosen the fixing bolt and carefully remove the old grout brush.
Install a new grout brush:
Place the new grout brush in the corresponding position on the front shield.
Use bolts or other fixing devices to secure the grout brush to the front shield. Ensure that the grout brush is securely installed and not loose.
If there is a thixotropic mud interface on the grout stop brush, ensure that the interface is correctly connected to the mud pipe and check for leaks.
Check installation: After installation, carefully inspect the installation of the grout stop brush to ensure its correct position, firm fixation, and no interference with the front shield and other components.
Testing: Before formal use, some simple tests can be conducted, such as injecting a small amount of thixotropic mud to check for leaks or other issues.
Record and maintenance: After installation, keep records, including installation date, materials and tools used, etc. Regularly check the use of the grout brush, and promptly maintain and replace it.
Please note that the above steps are only general suggestions, and specific operations may need to be adjusted according to the actual situation and equipment manual. If unsure how to operate, it is recommended to consult professional technicians or equipment manufacturers.
