The maintenance of TBM brushes mainly includes the following aspects:
Daily inspection and maintenance:
Hydraulic system: Check the oil level and temperature of the hydraulic oil tank to ensure that the oil level is close to the upper limit mark of the tank and the oil temperature is within the normal range (38-60 ℃). Check if there is any noise in the pump, motor, and valve. If there is any abnormality, stop the machine for inspection and repair
Electrical system: Regularly check the wiring condition of the electrical system to ensure that the wiring is secure, without damage or aging. Check the insulation performance of the electrical system to ensure safety and reliability
Lubrication system: According to the requirements of the lubrication table, regularly replace the lubricating oil to ensure the normal operation of the lubrication system. Check the oil level and quality of the lubrication system to ensure there are no leaks
Regular maintenance plan:
Replace hydraulic oil and clean filter: According to the operating condition of the equipment and the manufacturer's recommendations, replace hydraulic oil and clean the filter in a timely manner to ensure that the equipment is in the best working condition
Check fasteners: Check the fasteners of various parts of the equipment every day to ensure that they are loose or missing, to ensure stable operation of the equipment

Special maintenance: In the event of equipment malfunction or abnormal conditions, perform special maintenance, including repairing or replacing damaged parts, adjusting equipment parameters, etc
Safety precautions:
Before performing maintenance operations, the power must be turned off to ensure that there are no live operations. Do not repair hydraulic pipelines or joints under pressure, especially do not manually inspect areas with high-pressure leaks
Electrical repairs must be carried out by qualified professionals, always paying attention to controlling the power supply to avoid injury or death
It is strictly prohibited to disassemble hydraulic components and pipelines under pressure, step on high-pressure pipelines, and perform dangerous operations such as not conducting moisture analysis on the oil tank when adding new oil
Through the above maintenance measures, the service life of TBM can be effectively extended, work efficiency can be improved, and the smooth progress of tunnel excavation can be ensured.
