Cutting machine operating instructions
The operating instructions of the cutting machine include aspects such as starting, adjustment and safe operation.
Starting and basic operation of the cutting machine
Power connection: Make sure that the power supply voltage meets the equipment requirements, and then turn on the power.
Start the equipment: Press the red switch or knob switch to start the cutting machine.
Preheating: Allow the cutting disc to run at full speed. Especially for long-term cutting operations, measures must be taken to prevent the cutting disc from overheating.
Adjustment and setting of the cutting machine
Select the cutting disc: Select the appropriate cutting disc according to the material to be cut.
Adjust the cutting depth and angle: Adjust the cutting depth and angle as needed to ensure the cutting effect.
Platform and feed adjustment: Correct the platform origin, adjust the feed distance and swing angle to ensure the accuracy and efficiency of cutting.
Safe operation and maintenance of the cutting machine
Safety measures: The operator needs to be familiar with the performance of the machine, wear protective glasses and masks, and avoid wearing gloves.
Cooling measures: For long-term cutting operations, take measures to prevent the cutting disc from overheating.
Maintenance: After cutting, lift the cutter and turn off the power, clean the dust and residue on the cutter, and store it in a dry and safe place.
