At the refueling port on the side of the machine
The position for adding lubricating oil to the cutting machine is usually at the oil inlet on the side of the machine, and the specific location may vary depending on the model and brand. Detailed instructions can generally be found in the user manual. The following are the precautions to be taken when adding lubricating oil:
Choosing the appropriate lubricating oil: Different cutting machine models and powers require the use of suitable lubricating oil. Improper selection or excessive addition can cause damage to the machine. It is recommended to choose the correct lubricant according to the user manual or consult with the dealer.
Clean the refueling port: Before refueling, it is necessary to ensure that the area around the refueling port is clean to prevent debris from entering the interior of the machine and affecting its performance. Be careful and cautious when refueling to avoid lubricating oil spillage.
Correct refueling: Add an appropriate amount of lubricating oil according to the machine requirements, do not add too much or too little. Excessive lubricating oil can affect the normal operation of the machine, while insufficient lubricating oil can accelerate machine wear.
Regularly replace lubricating oil: The cutting machine needs to regularly replace lubricating oil to ensure the normal operation of the machine and extend its service life. The replacement cycle needs to be determined based on the usage and frequency of the machine.
For specific types of cutting machines, such as laser cutting machines, automatic oiling equipment may also be installed. This type of equipment can be adjusted by setting the interval and duration of each refueling to maintain lubrication of the gear rack guide surface.
Please carefully read the user manual of the cutting machine and follow the relevant requirements before adding lubricating oil to ensure safety and normal operation of the machine. If you have any questions or concerns, it is recommended to consult with the dealer or relevant professionals.
